The Bellavita Dive Bath Lift is a battery-powered seat that raises and lowers inside an existing bathtub. Its floating hand control operates the lift and reclining backrest. Side flaps rest on the tub edges for transfer, and the backrest removes with the drive unit for handling. White seat and backrest covers are included.
 Key specifications: Weight limit: 300 lb; Weight to lift: 21.8 lb; Lowest seat: 2.6 in; Highest seat: 18.9 in; Outside width: 27.6 in; Seat width: 15 in; Seat depth: 20.7 in; Length: 40.2 in; Backrest recline: 10° to 50°; Base plate length: 24 in; Base plate width: 11.8 to 12.2 in; Suction feet: 4. Drive figures.
 Frequently asked questions:
 Will Bellavita Dive fit my bathtub? Check the actual tub floor, rim height and backrest clearance, including grab handles. The base plate is 24 inches long and 11.8 to 12.2 inches wide. Overall width is 27.6 inches with the side flaps open. The flaps must rest flat on both tub edges at transfer height.
 Does the Bellavita Dive need plumbing or electrical installation? No. The battery-powered lift sits inside the bathtub and uses four suction feet. The tub floor and suction feet must be clean and dry for setup. Charge the hand control after every bath and follow the supplied instructions.
 How does the backrest recline? After the seat reaches its lowest position, the backrest reclines up to 50 degrees. Releasing the down button stops movement. Make sure the backrest has enough room and does not rest against the tub wall.
 Can the lift be removed from the bathtub? Yes. The backrest and drive unit separate from the seat unit for handling. The total weight with the hand control is 21.8 lb. Follow the removal sequence in the owner instructions.